Trimming Ribs.

It's time to trim the ribs. I opted to do this a easier way than the traditional router method.

As you can see here, the ribs are too long (it's easier just to make them longer and then trim them).



What I did, was use a saw called a "pull saw".....this saw is basically a handsaw turned on it's side, and has an extremely fine blade, that is EXTREMELY sharp.



The saw is so sharp, it literally took me about 10 strokes per rib....so the whole skirt when extremely fast. Here's a look at the finished product.



Next up, Siliconing the skirt to clean the gaps.